Figure 4-55
3. The inserted blue link step has received in the MP an additional step property "ID
namespace" and a step configuration property "Manage in".
The values of both properties are assigned a standard default value, which you can change.
These properties, which can only exist in the MP, are accepted for all gray steps below the
link step, and displayed for these. However, they can only be changed on the blue link step.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Insert link step
Create MyConfig - Expert
4.4 Project folder
241