Viewing The Slot Sensor Status - Siemens RUGGEDCOM ROX II User Manual

Chapter 3
Device Management
pm1 88-300 VDC or 85-264VAC, screw terminal block
2012-10-24Z 06:44:32Z
lm1 1000TX w/ 2x RJ45
2012-10-24Z 06:42:28Z
lm2 none
2012-10-24Z 06:42:28Z
lm3 6x RS232/RS422/RS485 via RJ45
2012-10-24Z 06:42:28Z
lm4 none
2012-10-24Z 06:42:28Z
lm5 none
2012-10-24Z 06:42:28Z
lm6 none
2012-10-24Z 06:42:28Z
main RX1501 8 Gigabit Layer 3 w/ 6 LM slots and 1 PM slots
2012-10-24Z 06:44:32Z
This table or list provides the following information:
Parameter
slot
detected-module
state
status-string
uptime
start-date
start-time
Section 3.2.6

Viewing the Slot Sensor Status

To view information about the slot sensors, type:.
show chassis sensors slot-sensors
A table or list similar to the following example appears:
ruggedcom# show chassis sensors slot-sensors | tab
SLOT DETECTED MODULE
--------------------------------------------------------------------------------------------
pm1 88-300 VDC or 85-264VAC, screw terminal block
lm1 1000TX w/ 2x RJ45
lm3 6x RS232/RS422/RS485 via RJ45
main RX1501 8 Gigabit Layer 3 w/ 6 LM slots and 1 PM slots
54
Description
Synopsis: { ---, pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, swport, eth, serport,
celport, cm, em, trnk }
The slot name, as marked on the silkscreen across the top of the chassis.
Synopsis: A string 1 to 60 characters long
The installed module's type specifier.
Synopsis: { unknown, empty, disabled, resetting, operating, failed, disconnected }
The current state of the installed module.
Synopsis: A string
The runtime status of the installed module.
Synopsis: A string
The total time elapsed since the start-up of the installed module.
Synopsis: A string
The date on which the installed module was started up.
Synopsis: A string
The time at which the installed module was started up.
operating Normal 1D 4hr 47min 12sec
operating Normal 0D 0hr 0min 0sec
empty ---- 0D 0hr 0min 0sec
operating Normal 0D 0hr 0min 0sec
empty ---- 0D 0hr 0min 0sec
empty ---- 0D 0hr 0min 0sec
empty ---- 0D 0hr 0min 0sec
operating Normal 1D 4hr 47min 12sec
CURRENT
TEMPERATURE SUPPLY
48 2669
- -
- -
42 1661
Viewing the Slot Sensor Status
RUGGEDCOM ROX II
CLI User Guide
VOLTAGE
SUPPLY
3385
-
-
3327