Viewing Transport Connection Statistics; Viewing Dnp Device Table Statistics - Siemens RUGGEDCOM ROX II User Manual

Chapter 3
Device Management
Parameter
rx-chars
rx-packets
packet-errors
parity-errors
framing-errors
overrun-errors
Section 3.19.3

Viewing Transport Connection Statistics

To view the statistics collected for all transport connections, type:
show interfaces serial transport-connections
A table or list similar to the following appears:
ruggedcom# show interfaces serial transport-connections | tab
INDEX REMOTE IP
------------------------------------------------------------------------------------
1 10.200.22.199
These tables or lists provide the following information:
Parameter
remote-ip
remote-port
local-port
transport
rx-packets
tx-packets
target-port
status
Section 3.19.4

Viewing DNP Device Table Statistics

To view the statistics collected for DNP device tables, type:
108
REMOTE LOCAL
PORT PORT TRANSPORT
15836 20000 TCP
Description
The number of bytes received by the serial port.
The number of packets received by the serial port.
The number of packet errors on this serial port.
The number of parity errors on this serial port.
The number of framing errors on this serial port.
The number of overrun errors on this serial port.
RX TX TARGET
PACKETS PACKETS PORT
177 0 ser-3-1,
Description
Synopsis: A string 1 to 32 characters long
The IP address of the remote serial server.
The port of the remote serial server.
The local port for the incoming connection.
Synopsis: A string 1 to 8 characters long
The transport protocol (UDP or TCP) for this serial port.
The number of packets received from TCP/UDP.
The number of packets transmitted to TCP/UDP.
Synopsis: A string 1 to 1024 characters long
The target serial port.
Synopsis: A string 1 to 31 characters long
The connection status of the serial port.
RUGGEDCOM ROX II
CLI User Guide
STATUS
Active
Viewing Transport Connection Statistics