Viewing Vrf Interface Statistics - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Advantages
• Create multiple isolated network pipes for various
data streams
• Provide individualized security for each VRF
• Manage each VRF separately for audit and billing
purposes
• Create separate Intranets within one work
environment
• Create VRFs based on differing services (e.g.
Finance, engineering, HR, etc.)
• Reduce the size of routing tables
• Re-use of IP addresses or subnets
• MPLS IP VPNs can replace much more expensive,
leased T1/E1 lines, while providing the same level of
security
Section 5.22.2

Viewing VRF Interface Statistics

To view statistics for interfaces associated with a VRF instance, type:
show interfaces vrf vrf ip
Where:
• vrf is the chosen VRF list
A table or list similar to the following example appears:
ruggedcom# show interfaces vrf VRF1 ip | tab
ADMIN
TX IPV4
NAME STATE STATE
DROPPED COLLISIONS
--------------------------------------------------------------------------------------------------------------------
fe-1-1 not set not set
0
1.9.5.2/24
fe-1-2 not set not set
0
1.7.5.1/24
fe-1-3 not set not set
0
1.1.1.1/32
This table or list provides the following information:
Parameter
name
admin-state
Viewing VRF Interface Statistics
RX
POINTOPOINT BYTES
ADDRESS
false 8842726
false 4874496
false 7730176
Description
Synopsis: A string 1 to 15 characters long
The name of the interface.
Synopsis: { not set, up, down, testing, unknown, dormant, notPresent, lowerLayerDown }
Disadvantages
• Greater memory consumption. Each VRF configured
results in BGP route replication and requires new FIBs
and IP routing tables
• Extra processing (overhead) and memory
consumption due to namespace management
RX RX RX
PACKETS ERRORS DROPPED
117751 0 0
70821 0 0
120784 0 0
Setup and Configuration
TX TX TX
BYTES PACKETS ERRORS
5366914 64721 0
5849272 71022 0
9423076 120810 0
Chapter 5
TX
0
0
0
381