Viewing The Cdma Network Status For Cellular Modems - Siemens RUGGEDCOM ROX II User Manual

Chapter 3
Device Management
211# show interfaces cellmodem cel-1-1 hspaplus hspaplus
hspaplus
network supported GSM,GPRS,EDGE,UMTS,HSDPA/HSUPA,HSPA+
imei
radio
rssi indicator
network operator
network in use
network status
sim
This list provides the following information:
Parameter
network-supported
imei
radio
rssi-indicator
network-operator
network-in-use
network-status
sim
active-profile
Section 3.22.5

Viewing the CDMA Network Status for Cellular Modems

To view the status of the CDMA network for a cellular modem, type:
show interfaces cellmodem cdma
A list similar to the following example appears:
ruggedcom# show interfaces cellmodem cdma
interfaces cellmodem cel-4-1 cdma
cdma
network supported "CDMA 1xRTT/EV-DO"
esn
ecio
rssi indicator
network operator
network in use
128
353567040070824
on
-83
"\"KORE\",2"
UMTS
"Registered to Home network"
89302370200990049282
0x60CFCB3A
-11
-79
Verizon
"1xEV-DO, Revision A\n"
Description
Synopsis: A string 1 to 128 characters long
Wireless technologies supported by the modem
Synopsis: A string 1 to 128 characters long
International Mobile Equipment Indentity
Synopsis: A string 1 to 128 characters long
The current RF status of cellmodem
The Received Signal Strength Indicator in dBm
Synopsis: A string 1 to 128 characters long
The wireless network operator currently in use
Synopsis: A string 1 to 128 characters long
The network technology currently in use by the modem
Synopsis: A string 1 to 128 characters long
The registration status of the modem with the wireless network
Synopsis: A string 1 to 128 characters long
The Subscriber Indentity Module number
Synopsis: A string 1 to 128 characters long
The active profile of cellular connection
Viewing the CDMA Network Status for Cellular Modems
RUGGEDCOM ROX II
CLI User Guide