Siemens RUGGEDCOM ROX II User Manual page 239

RUGGEDCOM ROX II
CLI User Guide
Parameter
enabled
listen-ip { listen-ip }
port { port }
extra-ip-ports { extra-ip-ports }
max-sessions { max-sessions }
idle-timeout { idle-timeout }
in-bad-hellos
in-sessions
dropped-sessions
in-rpcs
in-bad-rpcs
out-rpc-errors
out-notifications
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Enabling and Configuring NETCONF Sessions
Description
Synopsis: true or false
Default: true
Provides the ability to configure NETCONF features on the device.
Synopsis: A string
Default: 0.0.0.0
The IP Address the CLI will listen on for NETCONF requests.
Synopsis: An integer between 0 and 65535
Default: 830
The port on which NETCONF listens for NETCONF requests.
Synopsis: A string
Additional IP addresses and ports on which NETCONF listens for NETCONF
requests. You can specify IP addresses and ports in the following forms:
<itemizedlist><listitem>nnn.nnn.nnn.nnn:port represents an IPv4 address followed by a
colon and port number. For example, 192.168.10.12:19343</listitem> <listitem>0.0.0.0
represents the default IPv4 address and default port number. This is the default
configuration.</listitem> <listitem>[::]:port represents an IPv6 address followed by a
colon and port number. For example, [fe80::5eff:35ff]:16000</listitem> <listitem>If using
the default address, do not specify another listen address with the same port.</listitem>
</itemizedlist>
Synopsis: { unbounded }
Default: 10
The maximum number of concurrent NETCONF sessions.
Synopsis: A string
Default: PT0S
The maximum idle time before terminating a NETCONF session. If the session is waiting
for notifications, or has a pending confirmed commit, the idle timeout is not used. A
value of 0 means no timeout.
The total number of sessions silently dropped because an
invalid 'hello' message was received. This includes hello
messages with a 'session-id' attribute, bad namespace, and
bad capability declarations.
The total number of NETCONF sessions started towards the
NETCONF peer.
inSessions - inBadHellos = 'The number of correctly started NETCONF sessions.'
The total number of NETCONF sessions dropped.
inSessions - inBadHellos = 'The number of correctly started NETCONF sessions.'
The total number of RPC requests received.
The total number of RPCs which were parsed correctly, but
couldn't be serviced because they contained non-conformant XML.
The total number of 'rpc-reply' messages with 'rpc-error'
sent.
The total number of 'notification' messages sent.
Chapter 5
Setup and Configuration
201