RUGGEDCOM ROX II
CLI User Guide
Parameter
predefined-zone { predefined-zone }
other { other }
all
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.17.14.5
Deleting Rules
To delete a rule, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Delete the rule by typing:
no security firewall fwconfig firewall fwrule rule
Where:
• firewall is the name of the firewall
• rule is the name of the rule
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.17.15
Validating a Firewall Configuration
To validate a firewall configuration, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Set the firewall as the working configuration by typing:
security firewall work-config name
Where:
• name is the name of the firewall configuration
Type commit and press Enter to save the changes. The system validates the firewall configuration and
3.
displays the results.
Section 5.17.16
Enabling/Disabling a Firewall
To enable or disable the firewall, do the following:
Deleting Rules
Description
A pre-defined zone
Synopsis: A string
An undefined zone (string).
All zones
Chapter 5
Setup and Configuration
293