Table of Contents
Advertisement
Chapter 4
System Administration
no admin users name
Where:
• name is the name of the user account.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 4.9.4
Monitoring Users
Users currently logged in to the device are monitored by RUGGEDCOM ROX II and can be viewed through the
CLI. RUGGEDCOM ROX II allows administrators to monitor users, log users out, and broadcast message to all
users.
To view a list of users currently logged in to the device, type:
who
A table or list similar to the following appears:
ruggedcom# who
Session User
Context From
*147
admin cli
145
admin webui
The following sections describe other actions that can be used to manage users logged in to the device:
•
Section 4.9.4.1, "Kicking Users from the Network"
•
Section 4.9.4.2, "Sending Messages to Users"
Section 4.9.4.1
Kicking Users from the Network
To log a user out of the device, type:
Type:
logout [ [ session | number ] [ user | profile ] ]
Where:
• number is the session number
• profile is the name of the user profile
Section 4.9.4.2
Sending Messages to Users
To broadcast a message to all users or a specific user, type:
send [ profile | all ] message
Where:
• profile is the name of the user profile
180
Proto Date
192.168.0.200 ssh
11:04:54 operational
192.168.0.200 https 10:51:05 operational
Mode
RUGGEDCOM ROX II
CLI User Guide
Monitoring Users
Advertisement
Table of Contents
Troubleshooting
