Managing Zones; Viewing A List Of Zones - Siemens RUGGEDCOM ROX II User Manual

Hide thumbs Also See for RUGGEDCOM ROX II:

Table of Contents

RUGGEDCOM ROX II

CLI User Guide

Table: Example

For more information about configuring rules, refer to

Section 5.17.8

Managing Zones

A network zone is a collection of interfaces for which forwarding decisions are made. Common zones include:

Table: Example

New zones may be defined as needed. For example, if each Ethernet interface is part of the local network zone,

disabling traffic from the Internet zone to the local network zone would disable traffic to all Ethernet interfaces. If

access to the Internet is required for some Ethernet interfaces, but not others, a new zone may be required for

those interfaces.

The following sections describe how to configure and manage zones for a firewall:

Section 5.17.8.1, "Viewing a List of Zones"

Section 5.17.8.2, "Adding a Zone"

Section 5.17.8.3, "Deleting a Zone"

Section 5.17.8.1

To view a list of zones, type:

show running-config security firewall fwconfig firewall fwzone

Managing Zones

Destination-Zone

Section 5.17.14, "Managing

The Internet

The local network

Demilitarized zone

The firewall itself

IPsec connections on w1ppp

IPsec connections on w2ppp

Setup and Configuration

Rx1500 Rx1512 Rx1501 Rx1510 Rx1511