Deleting A Remote Server Selector - Siemens RUGGEDCOM ROX II User Manual

Chapter 3
Device Management
Parameter
comparison { comparison }
level { level }
facility-list { facility-list }
4. Configure one or more selectors for the server. For more information, refer to
Remote Server
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 3.9.7.3

Deleting a Remote Server Selector

To delete a remote server selector, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the remote server selector by typing:
no admin logging server address selector name
Where:
• address is the IP address of the remote server
• name is the name of the log selector identifier
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
70
Selector".
Description
Synopsis: { same_or_higher, same }
Default: same_or_higher
The message severity levels to include in the log:
<itemizedlist><listitem><emphasis role="bold">same:</
emphasis> includes only messages of the severity level
selected in the <emphasis>Level</emphasis> field.</
listitem> <listitem><emphasis role="bold">same_or_higher:</
emphasis> includes messages of the severity level selected
in the <emphasis>Level</emphasis> field, and all messages
of higher severity.</listitem></itemizedlist> For example:
<itemizedlist><listitem>Selecting <emphasis role="bold">debug</
emphasis> in the <emphasis>Level</emphasis> field
and <emphasis role="bold">same</emphasis> in the
<emphasis>Comparison</emphasis> field includes only debug
messages in the log.</listitem> <listitem>Selecting <emphasis
role="bold">debug</emphasis> in the <emphasis>Level</
emphasis> field and <emphasis role="bold">same_or_higher</
emphasis> in the <emphasis>Comparison</emphasis> field
includes debug and all higher severity messages in the log.</
listitem></itemizedlist>
Synopsis: { emerg, alert, crit, err, warning, notice, info, debug,
none, all }
Default: all
The base message severity level to include in the log. <emphasis
role="bold">all</emphasis> includes all messages. <emphasis
role="bold">none</emphasis> excludes all messages. Other
levels are listed in order of increasing severity.
Synopsis: { auth, authpriv, cron, daemon, ftp, kern, lpr, mail,
news, security, syslog, user, uucp, local0, local1, local2, local3,
local4, local5, local6, local7, all }
The subsystems generating log messages. Messages from
the selected subusystems are included in the log. At least
one subsystem must be selected; up to 8 subsystems can be
selected.
Section 3.9.7.2, "Adding a
Deleting a Remote Server Selector
RUGGEDCOM ROX II
CLI User Guide