Deleting An Snmp Group - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
• level is the security level for the group
3. Configure the following parameter(s) as required:
Parameter
{ group }
{ security-model }
{ security-level }
read-view-name { read-view-name }
write-view-name { write-view-name }
notify-view-name { notify-view-name }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 5.11.9.3

Deleting an SNMP Group

To delete an SNMP group, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the SNMP group by typing:
no admin snmp snmp-access group model level
Where:
• group is the name of the group
• model is the security model for the group
• level is the security level for the group
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Deleting an SNMP Group
Description
Synopsis: A string 1 to 32 characters long
The name of the SNMP group.
Synopsis: { any, v1, v2c, v3 }
The SNMP security model to use: SNMPv1, SNMPv2c, or USM/SNMPv3.
Synopsis: { noAuthNoPriv, authNoPriv, authPriv }
The SNMP security level: <itemizedlist><listitem>authPriv: Communication with
authentication and privacy.</listitem> <listitem>authNoPriv: Communication with
authentication and without privacy.</listitem> <listitem>noAuthnoPriv: Communication
without authentication and privacy.</listitem></itemizedlist>
Synopsis: { no-view, v1-mib, restricted, all-of-mib }
Default: all-of-mib
The name of the read view to which the SNMP group has access: all-of-mib, restricted,
v1-mib, or no-view.
Synopsis: { no-view, v1-mib, restricted, all-of-mib }
Default: all-of-mib
The name of the write view to which the SNMP group has access: all-of-mib, restricted,
v1-mib, or no-view.
Synopsis: { no-view, v1-mib, restricted, all-of-mib }
Default: all-of-mib
The name of the notification view to which the SNMP group has access: all-of-mib,
restricted, v1-mib, or no-view.
Chapter 5
Setup and Configuration
215