Deleting A Subnet; Managing Custom Client Options For Subnets; Viewing A List Of Custom Client Options - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
4. If custom options are required for the subnet client, refer to
Option".
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.15.7.5

Deleting a Subnet

To delete a subnet, do the following:
1. Make sure the CLI is in Configuration mode.
2. Configure the following parameter(s) as required:
no services dhcpserver subnet name
Where:
• name is the name of the subnet
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.15.8

Managing Custom Client Options for Subnets

The following sections describe how to configure and manage custom client options for a DHCP subnet:
• Section 5.15.8.1, "Viewing a List of Custom Client Options"
• Section 5.15.8.2, "Adding a Custom Client Option"
• Section 5.15.8.3, "Deleting a Custom Client Option"
Section 5.15.8.1

Viewing a List of Custom Client Options

To view a list of custom client options configured for a DHCP subnet, type:
no services dhcpserver subnet name options client custom
Where:
• name is the name of the subnet
If custom client options have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver shared-network Shared options client custom
services
dhcpserver
shared-network Shared
options client
custom 22 2
!
custom 23 1
!
!
!
!
Deleting a Subnet
Section 5.15.8.2, "Adding a Custom Client
Chapter 5
Setup and Configuration
247