Siemens RUGGEDCOM ROX II User Manual page 138

Chapter 3
Device Management
Parameter
in-pkts
in-bcast-pkts
in-mcast-pkts
total-in-octets
total-in-pkts
out-octets
out-pkts
drop-events
out-bcast-pkts
out-mcast-pkts
crc-align-errors
undersize-pkts
oversize-pkts
fragments
jabbers
100
Description
dropped packets.
The number of received good packets (Unicast+Multicast
+Broadcast) and dropped
packets.
The number of good broadcast packets received.
The number of good multicast packets received.
The total number of octets of all received packets. This includes
data octets
of rejected and local packets which are not forwarded to the
switching core for
transmission. It should reflect all the data octets received on the line.
The number of received packets. This includes rejected, dropped
and local packets, as well as packets which are not forwarded to the
switching core for transmission. It
should reflect all packets received on the line.
The number of octets in transmitted good packets.
The number of transmitted good packets.
The number of received packets that are dropped due to lack of
receive buffers.
The number of transmitted broadcast packets.
The number of transmitted multicast packets. This does not include
broadcast
packets.
The number of packets received which meet all the following
conditions:
1. The packet data length is between 64 and 1536 octets inclusive.
2. The packet has invalid CRC.
3. A Collision Event has not been detected.
4. A Late Collision Event has not been detected.
The number of received packets which meet all the following
conditions:
1. The packet data length is less than 64 octets.
2. A Collision Event has not been detected.
3. A Late Collision Event has not been detected.
4. The packet has valid CRC.
The number of packets received with data length greater than 1536
octets and
valid CRC.
The number of packets received which meet all the following
conditions:
1. The packet data length is less than 64 octets, or it is a packet
without SFD and is less than 64 octets in length.
2. A Collision Event has not been detected.
3. A Late Collision Event has not been detected.
4. The packet has invalid CRC.
The number of packets which meet all the following conditions:
RUGGEDCOM ROX II
CLI User Guide
Viewing RMON Port Statistics