Siemens RUGGEDCOM ROX II User Manual page 76

Chapter 2
Using RUGGEDCOM ROX II
Parameter
monitor start filename
monitor stop filename
reportstats
config private
config exclusive
38
Description
troubleshooting purposes and all possible commands
are not documented. Misuse of maintenance mode
commands can corrupt the operational state of the
device and render the device inaccessible.
Logs in to the underlying operating system as the root user. The
user must be an administrator and be able to provide the maint-login
password.
Starts displaying the specified system log or tracing the specified
file. If necessary, the output can be redirected to a file. For
information on how to redirect output, refer to
Output Redirects". Use auto completion to view a list of available
logs and files.
Stops displaying the specified system log or tracing the specified
file. Use auto completion to view a list of available logs and files.
Displays an extensive collection of device-specific statistics. If
necessary, the output can be redirected to a file. For information
on how to redirect output, refer to
Redirects".
Enters a configuration mode where users can make changes to the
system. This is the primary mode for most users who want to make
changes to the device/network configuration. It can be accessed by
multiple Operator and Admin users.
All changes made during a private configuration session are hidden
from other users until they are committed. Each change must be
committed before it is applied to the active system.
If a user opens an exclusive configuration session during another
user's private configuration session, the user in the private
configuration session cannot commit their changes until the other
user ends their session.
Enters a configuration mode where users can make changes to
the system. This mode is similar to the private configuration mode,
except all other users are blocked from committing their changes
until the user using the exclusive configuration mode exits. Only one
Operator or Admin user can use the exclusive configuration mode at
a time per device.
When committing changes in exclusive configuration mode, use the
confirmed option to set a timeout period. Changes will be applied
for the set period of time, after which the configuration will be reset
to its previous settings. This allows users to test their configuration
changes before fully applying them to the active system.
For more information about the confirmed option, refer to
Section 2.6.9.5, "Configuration Mode General
IMPORTANT!
Always log out of the exclusive configuration mode
or exit the transaction. If the session is terminated
before a user exits properly, other users logged in to
the device will continue to be blocked from making
changes until the session timeout period expires.
RUGGEDCOM ROX II
CLI User Guide
Section 2.6.5, "Using
Section 2.6.5, "Using Output
Commands".
Administration Commands