Chapter 3
Device Management
Section 3.25.1
Managing Domain Names
The DNS service can be configured to use one or more domain names when quering a domain name server. The
list of domain names can include the domain in which the router is a member of, and other domains that may be
used to search for an unqualified host name (i.e. as though it were local).
The following sections describe how to configure and manage a list of domain names:
•
Section 3.25.1.1, "Viewing a List of Domain Names"
•
Section 3.25.1.2, "Adding a Domain Name"
•
Section 3.25.1.3, "Deleting a Domain Name"
Section 3.25.1.1
Viewing a List of Domain Names
To view a list of domain names, type:
show running-config dns search
If domain names have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin dns search
admin
dns
search ruggedcom.com
!
!
!
If no domain names have been configured, add names as needed. For more information, refer to
Section 3.25.1.2, "Adding a Domain
Section 3.25.1.2
Adding a Domain Name
To add a domain name, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Add the domain name by typing:
admin dns search name
Where:
• name is the name of the domain
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 3.25.1.3
Deleting a Domain Name
To delete a domain name, do the following:
156
Name".
RUGGEDCOM ROX II
CLI User Guide
Managing Domain Names