Accessing Maintenance Mode - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Auto booting [4-0]
indicates the active partition is Boot Partition 4.
4. Enter service mode on the active partition by typing the associated target number. For example, if the active
partition is Boot Partition 6, type 6-3. A login prompt for service mode appears.
5. Type root and press Enter. A password prompt appears.
NOTE
If a unique password/passphrase has not been configured, use the factory default password. For
more information, refer to
NOTE
The current service mode password/passphrase is the same as the password/passphrase for

accessing maintenance mode.

6. Type the current service mode password/passphrase and press Enter.
ruggedcom login: root
Password:
Last login: Tue Oct 13 13:37:38 EDT 2020 on ttyS0
Linux ruggedcom 3.0.0-2-8360e #1 Thu Jan 24 21:20:30 UTC 2013 ppc
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
now 80x20
Welcome to ruggedcom Partition1 (Rev ROX 2.4.0 (2013-01-24 18:20)) RX1510 SN
12110102-0012-0030060017
Temperature +38.5 C (+101.3 F)
root@ruggedcom:~#
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. Upon accessing service mode
on a device that is connected to a network, make sure SSH is disabled. Failure to disable SSH
once in service mode would allow anyone with remote access to the device and the root password
to access the Linux shell.
Section 2.8.3
Accessing Maintenance Mode
Maintenance mode grants access to the Linux shell.
To access maintenance mode, do the following:
CAUTION!
Configuration hazard – risk of data corruption. Maintenance mode is provided for troubleshooting
purposes and should only be used by Siemens Canada Ltd. technicians. As such, this mode is not fully
Accessing Maintenance Mode
Section 2.2, "Default User Names and
13:42:07 up 7 min
Disk 24% Memory 41%
Using RUGGEDCOM ROX II
Passwords".
8t-eterminal size
Chapter 2
47