Samsung DCS Programming Manual page 98

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 411
TYPE
DESCRIPTION:
Defines the type of signaling for the E1 trunks assigned to the card.
There are four (4) types of signaling as detailed below. There are six conditions of signalling
associated with E&M and DID.
MODE
0
1
2
3 UNUSE
4 NO ANSWER BACK
5 DIRECT BACK
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 411
Display shows
2a. Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
2b. Enter desired trunk type selection from above list
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2a
OR
In case of DID or AC15 press RIGHT soft key to advance
to type of trunk (e.g., WINK)
and press RIGHT soft key to return to step 2a
OR
3a. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 416 ASSIGN AC15 TRANSLATION
TYPE
LOOP
AC15 IMMEDIATE
DID IMMEDIATE
IMMEDIATE
IMMEDIATE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
MMC 714 DID NUMBER AND NAME TRANSLATION
ASSIGN E1 SIGNAL
CONDITIONS
DELAYED
DELAYED
DELAYED
DELAYED
DISPLAY
[701] E1 SIGNAL
UNUSE
[705] E1 SIGNAL
UNUSE
[705] E1 SIGNAL
LOOP
[705] E1SIGNAL
DID:WINK
PROGRAMMING
December 1996
WINK
WINK
WINK
WINK