Samsung DCS Programming Manual page 3

SAMSUNG DCS
TECHNICAL MANUAL
NOTE: When the system is programmed for multiple tenant use, each tenant
has an individual customer passcode enabled in MMC 201. The
access for tenant passcode is limited to only certain MMCs. See MMC
201 for more details.
After opening programming with the customer passcode, you must press
TRSF to exit. Now press TRSF and the MMC number you wish to access.
C. System level
All keysets can access station programs 102-117 without using a passcod.
Each user can only change station data for his/her own keyset.
When the LCD 12B or LCD 24B keyset is in programming, the display shows
instructions prompts and choices. Existing data is always displayed before it can
be changed. The keystroke sequence for each MMC is derailed in the following
pages.
Before you begin entering customer data, follow this important reminder.
When first installing this system, always use MMC 811 to reset and clear
memory.
This will ensure that you begin with clean default data.
Now begin entering customer data.
IMPORTANT REMINDER
1-2
PROGRAMMING
September 1997