Samsung DCS Programming Manual page 164

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 706
DESCRIPTION:
Allows a 11 character name to be entered for each system speed dial location. This name
enables the speed dial number to be located when using the directory dial feature. The directory
dial feature allows the display keyset user to select a speed dial location by scanning its name.
Names are written using the keypad. Each press of a key will select a character. Pressing a
different key will move the cursor to the next position. For example, if the directory name is "SAM
SMITH," press the number "7" three times to get the letter "S." Now press the number "2" once
to get the letter "A." Continue selecting characters from the table below to complete your
message. Pressing the "A" key will change the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the previous character,
press the UP key to move the cursor to the right.
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
DIAL Q
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -, <, >, /,
=, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
TRSF
ACTION
1. Press TRSF 706
Display shows
2. Dial system speed entry number (e.g., 505)
OR
Press UP or DOWN to select entry number
and press RIGHT soft key to move cursor
SYSTEM SPEED DIAL BY NAME
1 2
Q Z
space ?
A B
D E
G H
J K
M N
P R
T U
W X
: =
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to store and exit MMC
3 4
. )
, !
C @
F #
I $
L %
O ^
S &
V Q
Y (
[ ]
DISPLAY
SYS SPEED NAME
500:
SYS SPEED NAME
505:
PROGRAMMING
December 1996
5
0
1
2
3
4
5
6
7
8
9
Q
99-3-5