Samsung DCS Programming Manual page 17

SAMSUNG DCS
TECHNICAL MANUAL
Press UP or DOWN to select station
and press RIGHT soft key to move cursor
2b. Dial station number (e.g., 305)
OR
Press UP or DOWN to select station
speed blocks not assigned
3. Dial speed dial location (e.g., 05)
OR
Use UP or DOWN to scroll through
location numbers and use the RIGHT
soft key to move the cursor
OR
Press the LEFT soft key to return to
step 2
4. Enter the location name using the procedures
described above and
press RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3 to continue
entering entries
5. Press TRSF to store and exit
OR
Press SPK to store and advance to
next MMC
DEFAULT DATA: NONE
RELATED ITEMS: MMC 105 STATION SPEED DIAL
"A" BUTTON IS BUTTON #19 ON KEYSET
PROGRAMMING
December 1996
[305] SPEED NAME
SPDBLK NOT EXIST
[205] SPEED NAME
01:_
[205] SPEED NAME
01:SAM SMITH