Samsung DCS Programming Manual page 160

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 703
DESCRIPTION:
Provides a way to make toll restriction very easy and flexible. There are 500 entries allowable in
the allow table and each entry index can be assigned to a class of service. Each index can have
up to twelve digits. With the use of wild cards (MMC 704 Assign Wild Character), more flexibility
can be built into toll restriction. There are six toll levels, B through G, that are programmable. Toll
level A is set as unrestricted by default, and toll level H is set as in house only by default.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
WILD CARD KEY
BUTTON
19
20
21
ACTION
1. Press TRSF 703
Display shows
2. Dial in index number 001–500 (e.g., 005)
OR
Press UP or DOWN key to select index and press RIGHT
soft key to move cursor and enter via dial pad toll pattern
(e.g., 212)
OR
Enter wild card (e.g., 21X) from above list and press
RIGHT soft key to move cursor to COS options.
3. Press UP or DOWN key to move cursor along line until
under toll class mark (e.g., E)
Enter a 1 for YES or 0 for NO and press RIGHT soft key
to return to step 1
OR
Press LEFT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
TOLL ALLOWANCE TABLE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
DIAL
0
1
2
WILD CARD
X
Y
Z
DISPLAY
ALOW(001):BCDEFG
ALOW(005):BCDEFG
ALOW(005):BCDEFG
212
ALOW(005):BCDEFG
21X
ALOW(001):BCDEFG
212
PROGRAMMING
December 1996
:000000
:000000
:000000
:000000
:000100