Samsung DCS Programming Manual page 230

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 803
DESCRIPTION:
Allows the assignment of tenant groups on a per-cabinet, slot and port basis. The simple rule is
Cabinet-Slot-Port=Tenant. The simplicity of this program allows for flexible assignments. The only
information needed is the correct correlation of entries.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF
Display shows
2. Enter cabinet number if no change press RIGHT soft key
to move cursor
3. Enter slot number if no change press RIGHT soft key to
move cursor
4. Enter port number if no change press RIGHT soft key to
move cursor
5. Enter tenant number if no change press RIGHT soft key
to return to step 2
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: ALL ASSIGNMENTS TENANT 1
RELATED ITEMS: TENANT GROUP
ASSIGN TENANT GROUP
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
December 1996
DISPLAY
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1