Samsung DCS Programming Manual page 66

SAMSUNG DCS
TECHNICAL MANUAL
MMC:304
USE
DESCRIPTION:
Allow trunks the ability on a per-station basis to answer incoming calls, to dial out or to do both. If a
station is set to NO Dial, the station will not have the ability to place a call. If the station is set to NO
Answer, the station cannot answer an incoming call.
NOTE: MMC 406 Trunk Ring Assignment overrides this MMC for the Answer option.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 304
Display shows
2. Dial the station number ( e.g., 205)
OR
Press UP or DOWN key to select station and press
RIGHT soft key to advance to step 3
3. Dial the trunk ID number ( e.g., 704)
OR
Press UP or DOWN key to select trunk and press RIGHT
soft key to advance to step 4
4. Press UP or DOWN key to select YES/NO
option
OR
Dial 1 for YES or 0 for NO and press RIGHT soft key to
move cursor to ANS option
Press UP or DOWN key to select YES/NO
option
OR
Dial 1 for YES or 0 for NO and press RIGHT soft key to
return to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
ASSIGN EXTENSION/TRUNK
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
December 1996
DISPLAY
[201] USE [701]
DIAL:YES ANS:YES
[205] USE [701]
DIAL:YES ANS:YES
[205] USE [704]
DIAL:YES ANS:YES
[205] USE [704]
DIAL:NO ANS:YES
[205] USE [704]
DIAL:NO ANS:NO