Samsung DCS Programming Manual page 169

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 710
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing call placement.
This table works in conjunction with LCR ROUTE TABLE, LCR TIME TABLE and LCR MODIFY
DIGITS TABLE. There is a maximum of 500 entries with a digit string length of ten numerical
digits. This system will automatically maintain entered digit strings in numerical order. The
characters Q and # are also accepted, for use with feature codes.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 710
Display shows
2. Dial LCR entry (e.g.,005)
OR
Press UP or DOWN to select entry and press RIGHT soft
key to move cusor
3. Enter LCR digit string via the dial key pad and press
RIGHT soft key
OR
Press LEFT soft key to return to step 1
4. Enter digit lenght (00–31)
Cursor will move to RT:
Enter route selection (1–16)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
LCR DIGIT TABLE
DISPLAY
LCR DIGIT (001)
DIGIT:
LCR DIGIT (005)
DIGIT: _
LCR DIGIT (005)
DIGIT:305426
LCR DIGIT (005)
LENGHT:10 RT:01
PROGRAMMING
December 1996