Samsung DCS Programming Manual page 120

SAMSUNG DCS
TECHNICAL MANUAL
TIMER NAME
SMDR START/DTMF
SYS HOLD RECALL
TRANSFER RECALL
UCDS AUDIO ALARM
UCDS VISUAL ALAM
VOICE DIAL DELAY
AA INT DGT TIME: This timer controls the grace period between dialing valid digits before
transferring call to INVLID DEST as set in MMC 733 on a per-plan basis.
AA NO ACT TIME: If no digits are received by the AA module, this timer will expire and transfer the
call to the destination set in MMC 733 NO ACT DEST:.
ALERT TONE TIMER: This timer sets the duration of the attention tone preceding a call to a keyset in
the Voice Announce or Auto Answer mode. This tone will also precede a forced Auto Answer call.
ALM REM INTERVAL: This timer controls the time length between ring attempts at a station when
alarm reminder is set.
ALM REM RING OFF: This timer controls the length of the ring cycle duration when alarm reminder is
set at a station.
ATT RECALL TIME: This is the length of time a transfer recall will ring at a station before recalling the
operator.
AUTO REDIAL INT: This timer controls the time between attempts after RETRY dialing is set on a
station.
AUTO REDIAL RLS: This timer controls the duration of a Ring No Answer condition on a retry
number dialed before the auto redial is automatically canceled.
CALLBACK NO ANS: This timer controls the time before the callback is automatically canceled when
a callback detects Ring No Answer.
CAMP ON RECALL: This timer controls the duration of time a camped-on call will stay at a
destination before recalling to the transferring station.
CLIP DISPLAY TIME: The amount of time that the Calling Line ID information remains on the
keyset's display.
CLIP MSG RECEIVE: The amount of time that the system will allow a valid message from the C.O.
C.O.-C.O. DISCONNECT: This timer monitors the duration of a unsupervised conference; when it
expires, both trunks are disconnected.
CONFIRM TONE TIME: The tone heard when a feature is activated or deactivated.
DIAL PASS TIME: This timer is the wait time for preventing the misdialing of an outgoing call. After
the last digit has been dialed, the voice path is connected.
TIMER DESCRIPTIONS
DEFAULT
15 SEC
45 SEC
15 SEC
0 SEC
0 SEC
8 SEC
PROGRAMMING
December 1996
RANGE
1–255 SEC
0–255 SEC
0–255 SEC
0–990 SEC
0–990 SEC
05–15 SEC