Samsung DCS Programming Manual page 171

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 711
DESCRIPTION:
This table allows the flexibility of the system, through the LCR ROUTES, to allow calls placed at
any given time of day to use the least cost trunk route that is available. When LCR ROUTE
ADVANCE is allowed, it is possible for calls to be placed on more expensive trunks on any given
time of day. There are four possible time entries per day; the start time of the next time is the end
time of the previous time period.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
FEATURE KEYS
DAY VALUE
SUN 0
MON 1
TUE 2
WED 3
THU 4
FRI 5
SAT 6
ACTION
1. Press TRSF 711
Display shows
2. Dial day of week (SUN–SAT, e.g., WED)
OR
Press UP or DOWN to make day selection and press
RIGHT soft key to make entry and move cursor and
advance to step 3
3. Dial time band (A–D, e.g., B)
OR
Press UP or Down to make time band selections and
press RIGHT soft key to make entry and move cursor and
advance to step 4
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
TIME
A
B
C
D
LCR TIME TABLE
BAND
0
1
2
3
DISPLAY
LCR TIME (SUN:A)
HHMM:
LCR TIME (WED:A)
HHMM:
LCR TIME (WED:B)
HHMM:
PROGRAMMING
December 1996
LCRT
LCRRT 1
LCRRT 2
LCRRT 3
LCRRT 4
LCRT:-
LCRT:-
TIME:-