Samsung DCS Programming Manual page 223

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 744
DESCRIPTION:
Allow the DECT handset registration to be enable on DCS key system. If this MMC is not opened
and an attempt is made to register DECT handset, the error message will be displayed.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 744
2. Enter PASSCODE
Correct code shows
Incorrect code shows
+ If the SYSTEM ID in MMC 737 DECT SYSTEM ID has
not changed, the following message will be displayed.
ENABLE DECT REG.
NO REG. SYSTEM ID
3. Press UP or DOWN key to select ENABLE or DISABLE
and RIGHT soft key OR Dial 1 for ENABLE, dial 0 for
DISABLE.
4. To log out press TRSF key
BSI REGISTRATION ON/OFF
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
PROGRAMMING
DISPLAY
ENABLE DECT REG.
PASSCODE:
ENABLE DECT REG.
DISABLE
ENABLE DECT REG.
PASSCODE ERROR
ENABLE DECT REG.
ENABLE
APRIL 1995