Samsung DCS Programming Manual page 122

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
OFF HOOK RING: This timer controls the duration of time between ring bursts to a user who has a
camped-on call.
OFF HOOK SELECT: This timer controls the grace period before placing a internal/external call as
programmed in MMCs 306 and 307.
OHVA ANSWER TIME: This timer controls the time duration of an OHVA call before automatic
rejection.
OVERLAP INT DGT: This timer controls the grace period between receiving address informations in
overlap receiving mode via BRI/PRI line. After expiration of this timer then the system attendant will be
alerted .
PAGE TIME OUT: This timer controls the duration of a page announcement.
PAGE TONE TIME: This timer controls the duration of tone burst heard over the page prior to the
page announcement.
PARK RECALL TIME: This timer controls the duration of time a call is parked before recalling to the
call park originator.
PC-MMC LOCK OUT: This timer monitors the PCMMC activity, drops the link if no action is created
by PCMMC and returns the system back to secure program status.
POWER DOWN TIME: This timer monitors the power to the ROM pack to begin shutdown status.
RECALL DISCONNECT: This is the time an attendant recall will ring before being disconnected.
RECALL WAIT TIME: This is the time any recall (hold or transfer) continues to recall at your station
before it recalls to the operator.
SMDR START/DIAL PULSE(ROTARY): This grace period timer starts SMDR recording for rotary
dialing. This timer also controls the LCD duration timer on the keysets. The duration time displayed
and the SMDR time duration will be the same.
SMDR START/DTMF: This grace period timer starts SMDR recording for touchtone dialing. This timer
also controls the LCD duration timer on the keysets. The duration time displayed and the SMDR time
duration will be the same.
SYS HOLD RECALL: This timer determines the time calls can be left on hold before recalling back to
the holding station. This is a system-wide timer. Setting timer to 000 will defeat this feature and no
recalling will take place.
TRANSFER RECALL: This timer determines the time transferred calls ring before recalling. This is a
system-wide timer.
UCDS AUDIO ALARM: This timer determines the time to give audio alarm to the UCD supervisor if
the longest waiting calls are reached to this time.
UCDS VISUAL ALAM: This timer determines the time to give viaual alarm to the UCD supervisor if
the longest waiting calls are reached to this time.
VOICE DIAL DELAY: This timer monitors the duration of the interaction between main software and
voice dialer.