Samsung DCS Programming Manual page 182

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 716
DESCRIPTION:
This MMC provides secondary network access code when the call is routed to the secondary
network . Maximum entries are up to 16 and 10 digits maximum in length each.
NOTE:
The second entry may be selected as a primary secondary network. By default, 132(MCL Digital
Access). If dialed digits are not matches to the entry in the LCR DIGIT TABLE (MMC 710) and
started with 0, then the network code in the second entry will be dialed out by the system prior to
transmitting dialed digit.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 716
Display shows
2. Enter in index number (e.g., 3)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
3. Enter the desired access in via dial keypad
Press RIGHT soft key to enter and return to step 2 and
enter more entries
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: 1: 121
RELATED ITEMS: MMC 710 LCR DIGIT TABLE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
2: 132
3: 161
MMC 711 LCR TIME TABLE
MMC712 LCR ROUTE TABLE
MMC 713 LCR MODIFY DIGIT TAB
NETWORK CODE
DISPLAY
NETWORK CODE
1:121
NETWORK CODE
3:161
NETWORK CODE
3:163
PROGRAMMING
December 1996