Samsung DCS Programming Manual page 80

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 400
DESCRIPTION:
Assigns several options(listed below) on a per-trunk basis.
NOTE: 1A2 Emulation is not a common word, but it means the third party can be joined on an existing
Trunk conversation by pressing DTS key for the line on his keyset.
OPTIONS
0 1A2 EMULATION
1 TRUNK INC DND
2 TRUNK FORWARD
3 LCR ALLOW
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 400
Display show
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk
OR
Press ANS/RLS for all trunks and press RIGHT soft key to
move cursor to options
Dial option number from above list (0–2)
OR
Press UP or DOWN key to select option and press RIGHT
soft key to move cursor
3. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN key to select ON/OFF and press
RIGHT soft key to return to step 2
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
CUSTOMER ON/OFF PER TRUNK
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
Trunk override call (NO PRIVACY)
Allows trunk to override DND (DIL)
Allows trunk to be forwarded
LCR allow ON/OFF via direct trunk access
DISPLAY
[701] TRK ON/OFF
1A2 EMULATE:OFF
[704] TRK ON/OFF
1A2 EMULATE:OFF
[ALL] TRK ON/OFF
1A2 EMULATE :?
[704] TRK ON/OFF
TRK FORWARD :ON
[704] TRK ON/OFF
TRK FORWARD: OFF
PROGRAMMING
December 1996