Samsung DCS Programming Manual page 228

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 802
DESCRIPTION:
Allows the customer to have access to certain MMCs. For example, it is advised that the customer
have access to MMC 102 Call Forward for call forwarding but it is not advised that the customer
have access to MMC 710 LCR Digit Table for LCR dial plans. This MMC is for both tenants.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 802
Display shows
2. Enter desired tenant number (1–2) via dial keypad
OR
Press UP or DOWN key to make selection and
Press RIGHT soft key to move cursor
3. Enter desired MMC number via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
4. Enter 1 for YES or 0 for NO via dial keypad
OR
Press UP or DOWN key to make selection and press
LEFT soft key to return to step 3 to make additional
entries
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: Refer to the Table on the next page
RELATED ITEMS: MMC20 OPEN CUSTOMER PROGRAMMING
CUSTOMER ACCESS MMC NUMBER
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
December 1996
DISPLAY
MMC TENANT:1
100:STN LOCK:YES
MMC TENANT:1
100:STN LOCK:YES
MMC TENANT:1
102:CALL FWD:YES
MMC TENANT:1
102:CALL FWD:NO