Samsung DCS Programming Manual page 115

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 424
DESCRIPTION:
This program generates a table by which an ISDN termnial number is mapped into a BRI STATION
port.
For detailed description and other MMC-related procedure, please refer to "BRI RELATED MMC
PROCEDURE" of this book.
NOTE:
For each BRI access, two adjacent ports are assigned, so, you only have to map a number into one
of the two ports from a BRI access.
In this program you can map only one port to each number. That means you can't use a number in
more than 1 BRI access. In the meanwhile, more than one numbers can be mapped into a port and
used in a BRI access.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 424
Display shows
2. Dial a ISDN terminal number (e.g.,7803) and use the
RIGHT soft key to position the cursor to bottom row.
or press UP or DOWN key to select the number.
3. Press UP or DOWN key to select a STATION port. As
you press these keys, only STATION ports will be shown.
Use the RIGHT sodt key to position the cursor under the
ISDN terminal number again.
4. For the other ISDN terminal number, repeat from 2. To 3.
5 Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS: MMC 419 BRI OPTION
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
NONE
MMC 423 S/T MODE
PROGRAMMING
December 1996
S0 MAPPING
DISPLAY
[7801]S0 MAPPING
Õ NONE
[7803] S0 MAPPING
[7803]S0 MAPPING
707