Samsung DCS Programming Manual page 116

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 500
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a brief
description of each.
1. ALARM REMINDER
2. AUTO REDIAL
3. DISA INTERCOM CALL
4. DISA LOCK OUT
5. NEW CALL
6. UCD VISUAL ALARM
COUNTER
7. UCD AUDIO ALARM
COUNTER
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
SYSTEM-WIDE COUNTERS
This is the number of times that an alarm reminder will ring a
station before canceling. RANGE = 1–99.
This is the number of times the system will redial an outside
number after the auto redial feature has been activated.
RANGE = 1–15.
This counter sets the maximum number of intercom calls that
can be made after accessing a DISA line. RANGE = 1–99.
This is the number of attempts the system will allow to
incorrectly access a DISA line before locking out the DISA
line. RANGE = 1–99.
This is the number of times the system will allow a user to
signal New Call on a C.O. line during one call. RANGE = 1–
99.
This is the counter to determine giving visual alarm if the
number of calls are waiting to be answered in the UCD group
is reached to it.
RANGE = 0 - 25.
This is the counter to determine giving audio alarm if the
number of calls are waiting to be answered in the UCD group
is reached to it.
RANGE = 0 - 25.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
December 1996