Samsung DCS Programming Manual page 234

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 806
DESCRIPTION:
Allows the pre-programming of a slot for a specific card. For example, after the system is installed
and a new Trunk B card is added, running this program will cause the system to accept the card
for what it is and not for what it is not.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 806
Display shows
2. Enter in cabinet number (e.g., 3)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
3. Enter in slot number (e.g., 5)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: NONE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
CARD PRE-INSTALL
DISPLAY
CARD PRE-INSTALL
CABNET:1 SLOT:1
CARD PRE-INSTALL
CABNET:3 SLOT:1
CARD PRE-INSTALL
CABNET:3 SLOT:5
PROGRAMMING
December 1996