Samsung DCS Programming Manual page 60

SAMSUNG DCS
TECHNICAL MANUAL
MMC:300
DESCRIPTION:
Allows the following features to be enabled on a per-station basis.
ACCESS DIAL
MICROPHONE
OFFHOOK RING
SMDR PRINT
TGR ADV.TONE
VMAA FORWARD
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 300
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station
OR
Press ANS/RLS for all and press RIGHT soft key to move
cursor and advance to step 3
3. Press UP or DOWN to select feature and
press RIGHT soft key to move cursor and advance to
step 4
4. Press UP or DOWN to select ON/OFF and press RIGHT
soft key
OR
Dial 1 for ON or 0 for OFF
CUSTOMER ON/OFF PER STATION
Determines whether a user can select a trunk or trunk group by
dialing its directory number (DN). This selection should be turned to
off when using LCR.
Allows all keysets to be used in the speakerphone mode.
Will allow a short burst of ring tone to indicate another call.
When the station is set for no C.O. calls to and from this station, the
station will not print on SMDR. This includes transferred calls or calls
picked up from hold or park.
When this feature is set to ON, a warning tone will be heard each
time LCR advances to the next route
When this feature is set to ON, it will allow calls to be forwarded to
voice mail.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
December 1996
DISPLAY
[201] CUS.ON/OFF
ACCESS DIAL :ON
[205] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :OFF