Samsung DCS Programming Manual page 215

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 738
DESCRIPTION:
This MMC is used for deleting the registered information of DECT handset. This will erase the
information of DECT handset that has been saved previously.
This MMC has three modes.
First, FORCED mode. When this mode is programmed, DCS system clear the inforamtion of
registration by force.
Second, MANUAL mode. Whenever DCS system wants to clear the registration of DECT handset,
DCS system must take a confirmation from DECT handset. If the confirmation is SUCCESS, DCS
key system clear the registration of DECT hnadset( If the confirmation is FAILURE, DCS system
can't clear the information).
Third, ZAP mode. Whenever DCS system wants to forbid using specific DECT handset, DCS
system must select this mode. (This method is different from FORCED mode)
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 738
and Display shows
2. Enter the number of DECT handset via Dial key pad
and
Press the Right soft key to move the cursor
3. Select the deregistration mode via volume up/down key
and Display shows.
4.
CLEAR REGISTRATION
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
PROGRAMMING
DISPLAY
[7901]DECT CLEAR
MODE : FORCED
[7901]DECT CLEAR
MODE : FORCED
[7901]DECT CLEAR
DECT CLEAR :YES
[7901]DECT CLEAR
DECT CLEAR :YES
JUNE 1997