Samsung DCS Programming Manual page 203

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 728
DESCRIPTION:
Allows the system administrator or technician to associate a CLIP number received from the
central office with a name programmed in this translation table. If there is no match between a
received number and a name in this table,"no CLIP name" will be displayed.
The translation table consists of 250 entries with each comprised of eleven(11) digit telephone
number and a 16 digit name.
Names are written using the keypad. Each press of a key will select a character. Pressing the dial
pad key will move the cursor to the next position. For example, if the directory name is "SAM
SMITH", press the number "7" three times to get the letter "S". Now press the number "2" twice
to get the letter "A". Continue selecting characters from the table below to complete your
message.
NOTE: When the character you want appears on the same dial pad key as the previous
character, press the right soft key to move the cursor to the right.
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
DIAL ∗
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
A
ACTION
1. Press TRSF 728
Display shows first entry
2. Dial entry number (e.g.,005)
OR
Press UP or DOWN keys to scroll through entries.
Press RIGHT soft key to select entry
CLIP TRANSLATION TABLE
1 2
Q Z
space ?
A B
D E
G H
J K
M N
P R
T U
W X
: =
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Key19; act as toggle between upper case and lower case
3 4
. )
, !
C @
F #
I $
L %
O ^
S &
V ∗
Y (
[ ]
DISPLAY
CLIP XLATION (001)
DIGIT:
CLIP XLATION (005)
DIGIT:
PROGRAMMING
December 1996
5
0
1
2
3
4
5
6
7
8
9
∗