Samsung DCS Programming Manual page 7

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 101
DESCRIPTION:
Allows the system administrator or technician to reset any keyset's passcode to its default value
of "1234". This MMC cannot display station passcodes; it can only reset them to default.
Keyset users can set or change their individual passcodes. The passcode is used to lock or
unlock the keyset and for toll restriction override and to access the DISA feature.
NOTE: Default passcodes cannot be used for toll restriction override or for DISA access.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 101
Display shows
2. Dial keyset number (e.g., 205)
OR
Use UP or DOWN to scroll through
keyset numbers and press RIGHT
soft key to move the cursor right
3. Press HOLD to reset passcode
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: ALL STATION PASSCODES = 1234
RELATED ITEMS: MMC 100 STATION LOCK
CHANGE USER PASSCODE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
PROGRAMMING
December 1996
DISPLAY
[201] PASSCODE
PASSCODE: Q Q Q Q
[205] PASSCODE
PASSCODE: Q Q Q Q
[205] PASSCODE
PASSCODE : 1234