Samsung DCS Programming Manual page 82

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 401
DESCRIPTION:
Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows PBX access codes to
be recognized, thus allowing more complete toll restriction. This mode is assigned on a per-trunk
basis. If a trunk requires the use of the RECALL key, it must be set to PBX mode.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 401
Display shows
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk numbers and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select ALL
3. Dial 1 for PBX or 0 for CO
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2 above
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: ALL TRUNKS C.O. LINE
RELATED ITEMS: MMC709 PBX ACCESS CODE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
C.O./PBX LINE
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE
PROGRAMMING
December 1996