Samsung DCS Programming Manual page 130

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 507
DESCRIPTION:
Enters the system into night mode automatically by utilizing time and day tables. A NIGHT key is
not needed as the system will switch automatically, it is helpful to have a dedicated button so the
status can be manually changed. The start time is the time the system will switch from day to
night service and the end time is the time the system will end night service which was set the day
before. (e.g., start 1730 WED, end 0800 WED) This prevents entering of start and stop times.
FEATURE KEYS
0 SUN
1 MON
2 TUE
3 WED
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 507
Display shows
2. Dial day number (0–6 e.g., 3)
OR
Press UP or DOWN key to select day and press RIGHT
soft key to advance cursor to step 3
3. Dial in start time for night (1730)
If time entered is valid, cursor moves to end time
Enter end time
If time entered is valid, system returns to step 2
Begin again
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: START 0000
RELATED ITEMS: MMC 722 STATION KEY PROGRAMMING
ASSIGN AUTO NIGHT TIME
4
5
6
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
END 0000
MMC 723 SYSTEM KEY PROGRAMMING
THU
FRI
SAT
DISPLAY
NIGHT TIME (SUN)
ST:0000 END:0000
NIGHT TIME (WED)
ST:0000 END:0000
NIGHT TIME (WED)
ST:1730 END:0800
PROGRAMMING
December 1996