Samsung DCS Programming Manual page 24

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 110
DESCRIPTION:
Allows the system administrator to set any of the keyset features listed below.
0. AUTO HOLD
1. AUTO TIMER
2. HEADSET USE
3. HOT KEYPAD
4. KEY TONE
5. PAGE REJOIN
6. RING PREF.
7. CALL COST.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 110
Display shows
2. Dial keyset number (e.g., 205)
OR
Press UP or DOWN to select keyset and
press RIGHT soft key to move cursor
OR
Press ANS/RLS for ALL
3. Dial option number from above list
(0–5, e.g., 3)
Automatically places an existing C.O. call on hold if a CALL button,
trunk key or trunk route key is pressed during that call.
Automatically starts the stopwatch timer during a C.O. call.
When on, this feature disables the hookswitch allowing a headset
user to answer all calls by pressing the ANS/RLS button.
When on, this feature allows the user to dial directory numbers
without having to first lift the handset or press the SPK button.
Allows the user to hear a slight tone when pressing buttons on
his/her set.
Allows the user to hear the latter part of page announcements if
his/her keyset becomes free during a page.
When off, requires the user to press the fast flashing button to
answer a ringing call after lifting the handset.
If enabled (ON), LCD shows real time call cost calculated based on
Metering Pulses arrived.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
KEYSET ON/OFF
DISPLAY
[201] STN ON/OFF
AUTO HOLD :OFF
[205] STN ON/OFF
AUTO HOLD :OFF
[ALL] STN ON/OFF
AUTO HOLD :?
[205] STN ON/OFF
AUTO HOLD :OFF
PROGRAMMING
December 1996