Samsung DCS Programming Manual page 138

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 601
DESCRIPTION:
This program is much like MMC 600 Assign Operator Group but this one is for stations only. The
station groups that are available in this MMC will provide more flexibility in the usage of Uniform
Call Distribution (UCD), AA GROUP and VM/AA applications. A station, Common bell, and Ring
Page can be in more than one group, but must all be the same ring type. There is a maximum of
48 members per group.
NOTE:
1. A device for announcement if used must provide a hookflash and return the call back to the
group. If a station is in more than one group and attempts to use the IOG key, it will be r
emoved from all groups.
2. In DCS/Compact System: maximum 30 of members are allowed in one group.
GROUP TYPES
0 NORMAL GROUP
1 VMAA GROUP
2 UCD GROUP
3 AA GROUP
Other possible entries:
3801–3820 COM. BELL
3601–3640 RING PAGE
FEATURE KEY
0 TYPE
1 RING
2 OVERFLOW
3 GRP TRSF
4 WRAP-UP
5 NEXT PORT
6 MEMBER
RING MODES
0 SEQUENTIAL
1 DISTRIBUTE
2 UNCONDITION
PROGRAM KEYS
ASSIGN STATION GROUP
Can only have distribute or sequential ringing.
Has wrapup capability.
Can only distribute or sequential ringing.
This device is a common bell relay on a Trunk A
card.
This device is ring over an external page zone output
of a Trunk A card.
Group type (Normal, VM/AA, UCD)
Ring mode
Overflow time
Group transfer time
Wrap-up time (timer only valid.in type = UCD)
Overflow port
Group member (e.g., station 202)
The first idle station listed in the group will ring. If the first is busy, the
next idle station will ring.
The first call will ring the first station listed in the group. The next call
will ring the next station listed in the group.
All the stations listed in the group will ring, busy stations will receive
off-hook ring. MAXIMUM 32 STATIONS RINGING.
PROGRAMMING
December 1996