Samsung DCS Programming Manual page 102

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 415
DESCRIPTION:
Allows the system administrator of technician to enable or disable the reporting of bandoned CO calls
for which CLIP information has been collected on a per trunk basis.
There are two options for this MMC as follows.
0 REPORT : NO Abandoned call records for incoming calls with CLIP information
will not be printed on SMDR or stored in the system call
abandon list.
1 REPORT : YES
Note :
In order for these abandoned call records to print on SMDR, in MMC 725 SMDR
Options, Option 11 Print Abandoned Call Records must be set to YES.
ACTION
1. Press TRSF 415
Display shows
2. Dial TRUNK number
OR
Press UP or DOWN to select trunk and use left or right
soft key to move cursor
3. Dial 1 for YES OR Dial 0 for NO
OR
Press UP or DOWN to scroll through options and use left
or right soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA : All TRUNKS will not report data
RELATED ITEMS: MMC 119 CLIP DISPLAY
REPORT TRUNK ABANDON DATA
These records will continue to be stored in the station review list.
Abandoned call records for incoming calls with CLIP information will
be printed on SMDR or stored in the system call abandon list.
These records will also to be stored in the station review list.
MMC 312 ALLOW CLIP
MMC 608 ASSIGN REVIEW BLOCK
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
MMC 725 SMDR OPTIONS
MMC 728 CLIP TRANSLATION TABLE
PROGRAMMING
December 1996
DISPLAY
[701]TRK ABNDN
REPORT : YES
[705]TRK ABNDN
REPORT : YES
[705]TRK ABNDN
REPORT : NO