Samsung DCS Programming Manual page 107

SAMSUNG DCS
TECHNICAL MANUAL
• CHANNEL ANY
• POWER FEED
This field provides a selection whether power to a BRI access will be supplied or not.
NOTE:
Any change to POWER FEED option is effective only after restart of the BRI Card. Use MMC 418 to
restart the card.
In BRI-STN, DLSEND and BRI MODE are not included, because DCS uses implicit data for this
option. DCS will use en-bloc for DLSEND and P-MP for BRI MODE.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 419
Display shows
2 Dial BRI trunk number (e.g.,703) or press UP
or DOWN key to select the port.
3.a For TRUNK ports, display will be shown as right
column.
Use the RIGHT soft key to position the cursor under
CHANNEL ANY
3.a.1 Press UP or DOWN key to choose item (CHANNEL
ANY, BRI MODE or DLSEND).
If you choose BRI MODE, press RIGHT soft key to
move the cursor under YES/NO.
Use UP or DOWN key to select P-P NOR/P-P DDI/P-M
NOR/P-M MSN.
If you press RIGHT soft key cursor will be moved under
703.
If you press LEFT soft key cursor will be moved under
BRI MODE.
3.a.2 For another items repeat 3.a.1
3.a.3 For another port repeat from 2
3.b For STATION ports, display will be shown as right
column.
Same rule as 3.a will be applied.
3.a.3 Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
(Same as above description.)
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
CHANNEL ANY:YES
PROGRAMMING
December 1996
DISPLAY
[701] BRI-TRK
CHANNEL ANY : YES
[703] BRI-TRK
[703] BRI-TRK
BRI MODE:P-P NOR
[703] BRI-TRK
BRI MODE : MSN
[705] BRI-STN
CHANNEL ANY:YES