Samsung DCS Programming Manual page 156

SAMSUNG DCS
TECHNICAL MANUAL
EXAMPLE 2
This system is installed in an area where seven digits is a free call, 1 + seven digits is a toll call within
that area code and 1 + ten digits is a call to another area code. Area codes all have 0 or 1 as a
middle digit.
Customer requirements:
All classes (B, C, D, E, F and G) are restricted from dialing 411 calls, 976 calls, 1-900 calls and 0
l
+ calls.
Only Class B phones can dial 1-800 numbers.
l
Class C phones can only dial local calls, 1 + seven digits and numbers in area code 212.
l
Class E phones can only dial 911.
l
TOLL DENY TABLE
ENTRY DIGITS
001 976
002 1976
003 1XXX976
004 1900
005 1X1X
006 1X0
007 0
008 411
009 1800
010 X
EXAMPLE 3
This system is installed in an area where seven digits is a free call, 1 + seven digits is a toll call within
that area code and 1 + ten digits is a call to another area code. Area codes all have 0 or 1 as a
middle digit.
Customer requirements:
Class B phones are in a national telemarketing group that cannot dial numbers in its own area code
(305) but is allowed calls to all other area codes. 1-800 calls are allowed and 1-900 calls are not.
TOLL DENY TABLE
ENTRY DIGITS
001 X
002 1305
003 1900
BCDEFG
111111
111111
111111
111111
010000
010000
111111
111111
011111
000100
WILD CARD 0 1 2 3 4 5 6 7 8 9 ∗ #
X 1 1 1 1 1 1 1 1 1 1 0 0
Y 0 0 0 0 0 0 0 0 0 0 0 0
Z 0 0 0 0 0 0 0 0 0 0 0 0
BCDE
1000
1000
1000
TOLL ALLOW TABLE
ENTRY DIGITS
001 1212X
002 911
TOLL ALLOW TABLE
ENTRY DIGITS
001 1X0X
002 1X1X
003 1800X
PROGRAMMING
December 1996
BCDEFG
010000
000100
BCDE
1000
1000
1000