Samsung DCS Programming Manual page 49

SAMSUNG DCS
TECHNICAL MANUAL
ACTION
1. Press TRSF 210
Display shows
2. Press RIGHT soft key to move cursor
3. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN to make selection and press RIGHT
soft key
4. If you want to change SMDI VMS SET field
dial option number 2 from above list
at step 2.
Press UP or DOWN to make selection and press RIGHT
soft key
5. Repeat step 4 for further changing by varying option
number between 0 - 7.
OR
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
Note: Default values listed above can be different from those that your system have in the
current SW
RELATED ITEMS: MMC 310 LCR CLASS OF SERVICE
DISA PSWD
LCR
PERI UCD SET
SMDI VMS SET
DISA MOH
SMDR MASK
XFER MOH
DISP SYS SPD NAME
DDI FALLBACK→406
MMC 710 LCR DIGIT TABLE
DISPLAY
TEN. ON AND OFF
DISA PSWD :OFF
TEN. ON AND OFF
DISA PSWD :OFF
TEN. ON AND OFF
DISA PSWD :ON
TEN. ON AND OFF
SMDI VMS SET :ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
PROGRAMMING
December 1996