Samsung DCS Programming Manual page 231

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 804
DESCRIPTION:
Provides a means of setting parameters for the SIMs (Serial Interface Modules) to work with one
of the followings:
• a personal computer
• with SMDR recording
• with UCD staticics report/periodic UCD informations
• CTI(TSAPI) interface.
Programming can be accomplished easily with the tables below to customize any SIM port.
PARAMETER OPTIONS
Dial 0 Service
Dial 1 Baud Rate
Dial 2 Char Length
Dial 3 Parity
Dial 4 Retry Count
Dial 5 Stop Bit
Dial 6 Wait Time
Dial 7 SIM Pair
SERVICE TYPE
Dial 0
Dial 1
Dial 2
Dial 3
Dial 4
Dial 5
Dial 6
SPEED
Dial 0
Dial 1
Dial 2
Dial 3
Dial 4
CHARACTER LENGTH
Dial 7
Dial 8
PARITY
Dial 0
Dial 1
Dial 2
STOP BIT
Dial 1
Dial 2
SYSTEM I/O PARAMETER
Type of Service
Speed
Character Length
Parity Bit
Number of Retries
Stop Bit
Message Wait Time
Station Number Connected to SIM
PCMMC PCMMC
SMDR SMDR
CTI Dedicated Switch Link Interface
CTI/SMDR Switch Link Interface along with SMDR
UCD REPT UCD Report on request by the Suprevisor or daily
SMDR/UCD Both SMDR and UCD Report will be generated
Not used
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
7 bits
8 bits
None
Odd
Even
1 bit
2 bit
PROGRAMMING
December 1996