Samsung DCS Programming Manual page 101

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 414
DESCRIPTION:
This MMC assigns CO lines to be accepted either Metering Pulse or Polarity Reversal Signal on a per
trunk basis. Metering Pulse detection is required to install Metering Pulse Detection Unit on a trunk
card. Polarity Reversal Signal provided by the C.O may be arrived to the system when the other party
answers the outgoing call or the outside party clears the call when you are on a C.O line. If the trunk
assigned as PRS detection call duration time will be generated on an SMDR record once the PRS
has been detected. Moreover, PRS detection is essential for dropping C.O-C.O conversation with
unsupervised by the internal party.
ACTION
1. Press TRSF 414
Display shows
2. Dial TRUNK number
OR
Press UP or DOWN to select trunk and use left or right
soft key to move cursor
3. Dial 1 for PRS OR Dial 0 for MPD
OR
Press UP or DOWN to scroll through options and use left
or right soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA :
RELATED ITEMS: MMC 508 CALL COST
NONE
MPD/PRS SIGNAL
DISPLAY
[701] MPD/PRS
MPD
[705] MPD/PRS
MPD
[705] MPD/PRS
PRS
PROGRAMMING
December 1996