Samsung DCS Programming Manual page 227

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 801
DESCRIPTION:
Used to change the passcode allowing access to MMC 800 Enable Technician Program from its
current value.
NOTE: The passcode is four characters long. Each character can be digits 0–9 or Q. The current
or "old" passcode is required for this MMC.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1. Press TRSF 801
2. Enter new passcode
3. Enter new passcode again
4. If passcode is correct, press RIGHT soft key to continue
and enter desired MMC
5. If passcode is incorrect
6. System returns to step 2
7. Press TRSF to store and exit
OR
Press SPK to advance to MMC
DEFAULT DATA: DEFAULT PASSCODE = 4321
RELATED ITEMS: MMC 800 ENABLE TECHNICIAN PROGRAM
CHANGE TECHNICIAN PASSCODE
Used to enter passcodes
Save data and advance to next MMC
PROGRAMMING
December 1996
DISPLAY
TECH. PASSCODE
NEW CODE:_
TECH. PASSCODE
NEW CODE:QQQQ
TECH. PASSCODE
VERIFY : :QQQQ
TECH. PASSCODE
VERIFY :SUCCESS
TECH. PASSCODE
VERIFY :FAILURE
TECH. PASSCODE
NEW CODE: :QQQQ