Samsung DCS Programming Manual page 163

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 705
DIAL
DESCRIPTION:
Enables the assignment of system speed dialing numbers. There are 500 entries available for
programming.
Each speed dial number consists of a trunk or trunk group access code followed by a separator
and up to 18 digits to be dialed. These dialed digits may consist of 0–9, Q and #. If the system
recognizes a valid trunk or trunk group access number, it will automatically insert the separator.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
B
C
D
E
F
ACTION
1. Press TRSF 705
Display shows
2. Dial speed index desired (e.g., 505)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
3. Enter access code ( e.g., 9/701) plus the phone number
up to 18 digits (digits will scroll under)
and press RIGHT soft key to return to step 2
4. Press F key to toggle to MMC 706 step 3 to enter name
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: MMC 706 SYSTEM SPEED DIAL BY NAME
ASSIGN SYSTEM SPEED
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code "C"
Used to mask/unmask following digits. shows as "[" or "]"
Used to enter name for speed dial bin (see MMC 706)
MMC 606 ASSIGN SPEED BLOCK
PROGRAMMING
December 1996
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–121223456789
SYS SPEED NAME
505: